N O T E
Command Reference for MS Information
N O T E
N9360A Multi UE Tester GSM Programming Manual
If the mode is set to GSM, this command is invalid.
MS Information
TESTs:MANual:RESults:MSINformation:IMSI?
This query command returns the IMSI string up to 15 letters. At
preset, this is set to 001012345678901.
TESTs:MANual:RESults:MSINformation:IMEI?
This query command returns the IMEI string up to 15 letters. At
preset, this is set to 0.
TESTs:MANual:RESults:MSINformation:DIAL?
This query command returns the dialed number string up to 20
letters. At preset, this is set to 0.
TESTs:MANual:RESults:MSINformation:PCLass?
This query command returns a 1-digit power class value
(<int>). At preset, this is set to 0.
TESTs:MANual:RESults:MSINformation:GVERsion?
This query command returns the 1-digit version number
(<int>) of GSM mobile phone under test. At preset, this is set
to 0.
If the mode is set to GPRS or EGPRS, the commands for DIAL, PCLass and
GVERsion are invalid.
TESTs:MANual:RESults:MSINformation:QUALity?
This query command returns a value of RX Quality.
• <int 1> (1 digit) is 0 if measurement result is within the
measurement range, or 1 if measurement result is out of
range or the RX Quality is not measured.
Programming Command Reference
5
5-139