Agilent Technologies N9360A Programming Manual page 155

N9360A Multi UE Tester GSM Programming Manual
Each bit is set to 0 if the test is pass or skipped, or each bit is set
to 1 if the test is fail.
The value in the parentheses is decimal value for each bit. Refer
to Setting and Querying the Registers
If there are no test results, all bits are set to 1, the value 1023 is
returned.
TESTs:AUTO:RESults:ALL:EXPand?
This query command returns summary of the test results with
the integer value of <int 1>, <int 2>, and <int 3>. Each
value is separated by a comma.
• <int 1> contains test results by sum of the value of 11 bits
as follows.
bit 0 (1): Location Update
bit 1 (2): 1st Call
bit 2 (4): Talk
bit 3 (8): 1st Release
bit 4 (16): 2nd Call
bit 5 (32): NA
bit 6 (64): 2nd Release
bit 7 (128): NA
bit 8 (256): RF Test
bit 9 (512): NA
bit 10 (1024): Abort
Each bit is set to 0 if the test passed or skipped, or each bit is
set to 1 if the test failed.
If there are no test results, all bits are set to 1, the value 2047 is
returned.
Programming Command Reference
on page 4-18.
5
5-97