Display Screen; Table 6-3 Display Subsystem Command Summary - Agilent Technologies N9360A Programming Manual

Display Screen

Table 6-3 DISPlay Subsystem Command Summary

Item
Display Query
Initial Screen
Application Type
Automatic Test Screens
Stand-by
Peak TX Power
Burst Timing/Power Ramp
Phase Error/Frequency Error
Sensitivity/RX Quality/RX Level
Configuration Screens
System Configuration
Test Condition
Test Condition (Loss) Screen
Test Condition (Limit) Screen
Test Sequence
File Management
Network Setting
Configuration Screen (BA Table)
Test Condition (BA) Screen
Multiband Reporting
Neighbour Cell Channel
Neighbour Cell, Channel LIST
Manual Test Screens
Stand-by
Peak TX Power/Burst Timing/Power Ramp
N9360A Multi UE Tester GSM Programming Manual
The following commands are used to select a display of each test
item and test setup for each function mode.
Command
DISP?
DISP:INIT
DISP:APPL
DISP:AUTO:STBY
DISP:AUTO:PPOW
DISP:AUTO:TPOW
DISP:AUTO:PHAS
DISP:AUTO:SENS
DISP:CONF
DISP:CONF:COND
DISP:CONF:COND:LOSS
DISP:CONF:COND:LIM
DISP:CONF:SEQ
DISP:CONF:FILE
DISP:CONF:NET
DISP:CONF:COND:BA
DISP:CONF:COND:BA:MREP <int>
DISP:CONF:COND:BA:MREP?
DISP:CONF:COND:BA:TABL <int>,<enum>
DISP:CONF:COND:BA:TABL?
DISP:CONF:COND:BA:LIST?
DISP:MAN:STBY
DISP:MAN:TPOW
Programming Command Summary
6
6-5