Agilent Technologies N9360A Programming Manual page 123

N O T E
N O T E
N9360A Multi UE Tester GSM Programming Manual
SRB Loopback BER(EGPRS Test Mode SRB)
CONFigure:CONDition:SENSitivity:FRAMe:SRB <int>
CONFigure:CONDition:SENSitivity:FRAMe:SRB?
This command sets the number of the test frames for the error
ratio tests. The allowable range is from 1 to 13000 frames in 1
step size. At preset, this is set to 10 frames.
Set the "GSM mode" (GSM, GPRS or EGPRS) and the Test mode (A, B, C
or ACK) before the BER measurement.
Loopback Delay
CONFigure:CONDition:LDELay SHORT|MID|LONG
CONFigure:CONDition:LDELay?
This command sets loopback delay. The parameter is SHORT,
MID or LONG. At preset, this is set to MID.
This query command returns the set loopback delay with strings
of SHORT, MID or LONG.
This command is valid when the GSM mode is set to GSM.
Programming Command Reference
5
5-65