Agilent Technologies N9360A Programming Manual page 185

Programming Command Reference
5
Connection Mode
TESTs:MANual:CMODe TALK|TEST
TESTs:MANual:CMODe?
This command specifies performance in connection state. The
parameter is TALK or TEST. At preset, this is set to TALK.
This query command returns the set connection mode.
Caller ID
TESTs:MANual:CALLer:ID <string>
TESTs:MANual:CALLer:ID?
This command sets the Caller ID on the [Stand-by] screen.
<string>: Sets dialing number at BS Call (AMR) test step. Up to
20 digit arbitrary number (0 to 9) and symbol (*#) can be set.
This is not initialized by PRESET execution with the Starting
Condition softkey.
This query command returns the set Caller ID with string.
Caller ID (Sending)
TESTs:MANual:CALLer:ID:SEND ON|OFF|1|0
TESTs:MANual:CALLer:ID:SEND?
This command sets the Caller ID on the [Stand-by] screen.
<string>: Sets dialing number at BS Call (AMR) test step. Up to
20 digit arbitrary number (0 to 9) and symbol (*#) can be set.
This is not initialized by PRESET execution with the Starting
Condition softkey.
This query command returns the set Caller ID with string.
This command is valid only for the Manual Test.
N O T E
N9360A Multi UE Tester GSM Programming Manual 5-127