Command Reference For Update Flash - Agilent Technologies N9360A Programming Manual

Programming Command Reference
5

Command Reference for Update Flash

The update flash commands are used for update flash setting of
the Tester. The query commands return the settings of those
controls and parameters.
Update Flash
UPDAte:FLASh:TRIGger MC1X|1XEVDO
This command update the specified Flash ROM in the teseter.
MC1X is the Flash ROM for MC-1x CPU, 1XEVDO is the Flash
ROM for 1xEV-DO CPU.
Update MC-1x Flash List
UPDAte:FLASh:LIST:MC1X?
This query command returns the version of the archive file
which updates MC-1x Flash ROM which the tester recognizes.
The format of archive file is MC1X.xx.xx or MC1X.xx.xx.yy
(x: numeric character, y: alphanumeric character). It returns
?.??.?? if the tester is no recognized archive file.
Update 1xEV-DO Flash List
UPDAte:FLASh:LIST:1XEVDO?
This query command returns the version of the archive file
which updates 1xEV-DO Flash ROM which the tester recognizes.
The format of archive file is EVDO.xx.xx or EVDO.xx.xx.yy
(x: numeric character, y: alphanumeric character). It returns
?.??.?? if the tester is no recognized archive file.
MC-1x Flash ROM Revision
UPDAte:FLASh:REVision:MC1X?
This query command returns the revision of the MC-1x Flash
ROM which is installed in the tester. The format of revision is
MC1X.xx.xx or MC1X.xx.xx.yy (x: numeric character, y:
alphanumeric character). It returns ?.??.?? if the tester is no
recognized archive file.
N9360A Multi UE Tester GSM Programming Manual 5-21