Command Reference For Spectrum Monitor Measurement Screen - Agilent Technologies N9360A Programming Manual

Command Reference for Spectrum Monitor Measurement Screen

N9360A Multi UE Tester GSM Programming Manual
These commands are used to set the controls and parameters
associated with the Spectrum Monitor screen.
Display Span
TXANalyzer:SMONitor:SPAN 400K|100K
TXANalyzer:SMONitor:SPAN?
This command selects a frequency bandwidth (Span). The
parameter is 400K for the 0 to 400 kHz span, or 100K for the
±100 kHz span relative to the Traffic Channel frequency. At
preset, this is set to 400K.
This query command returns the selected frequency bandwidth
with strings. The meaning of the return value is same as that of
the command parameter.
Resolution Bandwidth
TXANalyzer:SMONitor:RBWidth 10K|30K
TXANalyzer:SMONitor:RBWidth?
This command selects a value of RBW (Resolution Bandwidth).
The parameter is 10K for 10 kHz or 30K for 30 kHz. This is set to
30K.
This query command returns the selected RBW with strings.
The meaning of the return value is same as that of the command
parameter.
Measurement Result
TXANalyzer:RESults:SMONitor?
If the 0 to 400 kHz span is selected by the
command described above, this query command returns
measurement result values <int 1>, <int 2>, <real 3>,
<real 4>, and <real 5>. Each value is separated by
comma.
Programming Command Reference
Display Span
5
5-187