Command Reference For Automatic Test Screens - Agilent Technologies N9360A Programming Manual

Programming Command Reference
5

Command Reference for Automatic Test Screens

Stand-by
DISPlay:AUTO:STBY 1|2
This command selects the Automatic Test [Stand-by] screen.
The parameter specifies the Sequence Number.
Peak TX Power
DISPlay:AUTO:PPOWer 1|2|3|4|5|6
This command selects the Automatic Test [Peak TX Power]
screen. The parameter specifies the Channel Number.
Burst Timing/Power Ramp
DISPlay:AUTO:TPOWer 1|2|3|4|5|6
This command selects the Automatic Test [Burst Timing/Power
Ramp] screen. The parameter specifies the Channel Number.
Phase Error/Frequency Error
DISPlay:AUTO:PHASe 1|2|3|4|5|6
This command selects the Automatic Test [Phase
Error/Frequency Error] screen. The parameter specifies the
Channel Number.
Sensitivity/RX Quality/RX Level
DISPlay:AUTO:SENSitivity 1|2|3|4|5|6
This command selects the Automatic Test [Sensitivity/RX
Quality/RX Level] screen. The parameter specifies the Channel
Number.
N9360A Multi UE Tester GSM Programming Manual 5-25