Agilent Technologies N9360A Programming Manual page 74

Programming Command Reference
5
5-16
Update History
UPDAte:HISTory?
This query command retruns the set of values, <int1>,
<int2>, <int3>, <int4>, <string1>, <string2>,
USB|HDD|SERVER, as histories of update from the starting
position specified by Update Histroy Position to the read-out
position specified by Update History Request Number. The
number of the maximum histories acquirable with this
command at once is 58. If the number of histories exceeds 58,
the acquisition of subsequent histories is attained by shifting an
acquisition start position by UPDAte:HISTory:POSition.
• <int 1> (2 digit) is the number of update history returned
with this query command.
• <int 2> (4 digit) is the year by which update was carried
out with yyyy.
• <int 3> (2 digit) is the month by which update was carried
out with mm.
• <int 4> (2 digit) is the day by which upadate was carried
out with dd.
• <string 1> (32 letters) is the version number of archive.
• <string 2> (4 letters) is the result code of update. If
update is a failure, it is equivalent to the error code. If
update is a success, it is 0000.
• USB|HDD|SERVER is the update type.
Update History Position
UPDAte:HISTory:POSition <int>
UPDAte:HISTory:POSition?
This command sets the read-out starting position of the history
of update result read by UPDAte:HISTory?. The allowable
range is from 1 to 2147483647 in 1 steps. However, actually the
number of the maximum read-out histories is 250. If 251 or
more values are set up, the read-out result of
UPDAte:HISTory? is 0. At preset, this is set to 1.
This query command returns the read-out starting position of
the history of update result setting with integer. The range of
this values is same as that of the command parameter.
N9360A Multi UE Tester GSM Programming Manual