Command Reference For Sms Screen - Agilent Technologies N9360A Programming Manual

Programming Command Reference
5

Command Reference for SMS Screen

N O T E
5-164
Resolution Bandwidth
TESTs:MANual:SMONitor:RBWidth 10K|30K
TESTs:MANual:SMONitor:RBWidth?
This command selects a resolution bandwidth. The parameter is
10K for 10 kHz or 30K for 30 kHz. At preset, this is set to 30K.
The following commands are valid when the mode is set to GSM.
SMS-CB/MT
TESTs:MANual:SMSCbmt:ASC <string>
TESTs:MANual:SMSCbmt:ASC?
This command sets a CB send text message (ASCII) to the MS
for the SMS-CB/MT on the [Stand-by] screen. <string> is up to
160 characters.
This query command returns the set CB sent text message with
strings.
TESTs:MANual:SMSCbmt:BIN <int 1>,<int 2>,<int
3>,<string 4>
TESTs:MANual:SMSCbmt:BIN?
This command sets a MT sent binary message to the MS for the
SMS-CB/MT on the [Stand-by] screen.
• <int 1> sets the Coding Scheme for CB
• <int 2> sets the Coding Scheme for MT
• <int 3> sets the data size of <string 4>
• <string 4> sets the sent message an hexadecimal string
packed with 7-bit characters (Max.: 280 characters).
For details, consult the item SMS Data Coding Scheme in ETSI
TS 123 038 V5.0.0.
This query command returns the set MT sent binary message.
The return values are same as the command parameter. Each
value is separated by a comma.
N9360A Multi UE Tester GSM Programming Manual