Agilent Technologies N9360A Programming Manual page 219

N9360A Multi UE Tester GSM Programming Manual
ORFS Switching Measurement
TESTs:MANual:RESults:ORFS:SW?
This query command returns the ORFS Switching measurement
result values <int 1>, <int 2>, <real 3> and <real 4>.
Each value is separated by a comma.
• <int 1> (1 digit) is 0 if measurement results are within the
measurement range, or 1 if any measurement result is out of
range or the ORFS Switching is not measured.
• <int 2> (1digit) is the test result for the 0 (pass) or 1 (fail).
• <real 3> is the Lower value and <real 4> is the Upper
value of the measurement results. If the measurement result
is out of range or the ORFS Switching is not measured, the
value 99.99 is returned.
Ref. Power
TESTs:MANual:RESults:ORFS:Power?
This query command returns the Ref. Power measurement
result value, <int>. The parameter is ranging from -99.99 to
99.99.
Programming Command Reference
5
5-161