Agilent Technologies N9360A Programming Manual page 239

N9360A Multi UE Tester GSM Programming Manual
Frequency Error Measurement
TXANalyzer:RESults:FREQuency?
This query command returns the Frequency Error
measurement result values <int 1>, <int 2> and <real 3>.
Each value is separated by a comma.
• <int 1> (1 digit) is 0 if measurement result is within the
measurement range, or 1 if measurement result is out of
range or the Frequency Error is not measured.
• <int 2> (1 digit) is the test result for the 0 (pass) or 1 (fail).
• <real 3> (up to 5 letters) is the measured Frequency Error
data ranging from -9999 to 9999 (Hz). If measurement
result is out of range or the Frequency Error is not
measured, the value 99999 is returned.
This command is a command for compatibility with the former,
and returns measured value by the resolution of a 1 Hz unit.
Since a following EXPand command can return in finer
resolution, and it is recommendation to use it.
TXANalyzer:RESults:FREQuency:EXPand?
This query command returns the Frequency Error
measurement result values <int 1>, <int 2> and <real 3>.
Each value is separated by a comma.
• <int 1> (1 digit) is 0 if measurement result is within the
measurement range, or 1 if measurement result is out of
range or the Frequency Error is not measured.
• <int 2> (1 digit) is the test result for the 0 (pass) or 1 (fail).
• <real 3> (up to 7 letters) is the measured Frequency Error
data ranging from -99999.9 to 99999.9 (Hz) in 0.1 steps. If
measurement result is out of range or the Frequency Error is
not measured, the value 99999.9 is returned.
Programming Command Reference
5
5-181