Rfgenerator Subsystem; Rfgenerator Subsystem Command Reference; Table 5-49 Rfch Allowable Range And Preset Value - Agilent Technologies N9360A Programming Manual

Programming Command Reference
5

RFGenerator Subsystem

RFGenerator Subsystem Command Reference

5-190
The RFGenerator subsystem commands are used to set and get
the controls and parameters of the Signal Generator functions.
Radio System
RFGenerator:RFORmat <<
GSM850|GSM900|DCS1800|PCS1900
RFGenerator:RFORmat?
This command selects a Radio System to be tested. The
parameter is GSM850, GSM900, DCS1800 or PCS1900. At
preset, this is set to GSM900.
This query command returns the selected Radio System with
strings.
RFCH
RFGenerator:CHANnel <int>
RFGenerator:CHANnel?
This command sets the channel number for each radio system
set by the Radio System
allowable range and preset values are as follows:

Table 5-49 RFCH Allowable Range and Preset Value

RFORmat Allowable Range
GSM850 128 to 251
GSM900 0 to 124, 955 to 1023
DCS1800 512 to 885
PCS1900 512 to 810
command described above. The
N9360A Multi UE Tester GSM Programming Manual
Preset Value
188
20
698
698