Agilent Technologies N9360A Programming Manual page 153

N9360A Multi UE Tester GSM Programming Manual
bit 5 (32): NA
bit 6 (64): 2nd Release
bit 7 (128): NA
bit 8 (256): RF Test
bit 9 (512): NA
bit 10 (1024): Measurement end with test result
bit 11 (2048): Measurement end without test result (Aborted
or Time out error occurred)
The executed step is set to 1, and the others are set to 0.
The value in the parentheses is decimal value for each bit. Refer
to Setting and Querying the Registers
Power Ramp Template
TESTs:AUTO:RAMP:MASK:PCS NARRow|RELaxed
TESTs:AUTO:RAMP:MASK:PCS?
This command sets template type of Power Ramp measuremnt
for PCS1900. The parameter is NARRow or RELaxed. At preset,
this is set to NARRow. If RELaxed is set, the template is selected
same one for DCS1800. This setting is initialized to NARRow at
power on.
IMSI control
TESTs:AUTO:IMSI <string>
TESTs:AUTO:IMSI?
This command sets IMSI in Automatic Test [Stand-by] screen.
The maximum digit of <string> is 15 and the range of a digit
is from 0 to 9. The value is set a value without double quotation.
Preset value is 001012345678901.
This query command returns IMSI.
Programming Command Reference
on page 4-18.
5
5-95