Measuring Screens; Table 6-15 Manual Test [Measuring] Screen Command Summary - Agilent Technologies N9360A Programming Manual

Table 6-14 Manual Test [Stand-by] Screen Command Summary
Item
Peak TX Power/Burst Timing/Power Ramp
Phase Error/Frequency Error
Sensitivity
Averaging
RF output
Connection Mode
Caller ID
Caller ID (send)
Call Drop Timer
Power Ramp Template

Measuring Screens

Table 6-15 Manual Test [Measuring] Screen Command Summary

Item
Location Update
BS Call
Handover to W-CDMA
Handover to MC-1X
MS Answer
N9360A Multi UE Tester GSM Programming Manual
Command
TEST:MAN:TXP:STAT ON|OFF|1|0
TEST:MAN:TXP:STAT?
TEST:MAN:PHAS:STAT ON|OFF|1|0
TEST:MAN:PHAS:STAT?
TEST:MAN:SENS:STAT ON|OFF|1|0
TEST:MAN:SENS:STAT?
TEST:MAN:AVER OFF|2-200
TEST:MAN:AVER?
TEST:MAN:RFOU ON|OFF|1|0
TEST:MAN:RFOU?
TEST:MAN:CMOD TALK|TEST
TEST:MAN:CMOD?
TEST:MAN:CALL:ID <string>
TEST:MAN:CALL:ID?
TEST:MAN:CALL:ID:SEND ON|OFF|1|0
TEST:MAN:CALL:ID:SEND?
TEST:MAN:CDT <bool>
TEST:MAN:CDT?
TEST:MAN:TXP:MASK:PCS NARR|REL
TEST:MAN:TXP:MASK:PCS?
The following commands are used to set the controls and
parameters associated with the [Measuring] screen.
Command
TEST:MAN:LOC
TEST:MAN:BSC
TEST:MAN:HAND:WCDMA
TEST:MAN:HAND:MC1X
TEST:MAN:MSA
Programming Command Summary
6
6-29