Programming Command Reference
5
TESTs Subsystem for Manual Test
Command Reference for Stand-by Screens
5-118
This function allows you to execute real time measurements.
These commands are used to set the controls and parameters
associated with an initial test condition.
Radio System
TESTs:MANual:RFORmat <<
GSM850|GSM900|DCS1800|PCS1900
TESTs:MANual:RFORmat?
This command selects a Radio System to be tested. The
parameter is specified from GSM850, GSM900, DCS1800 and
PCS1900. At preset, this is set to GSM900.
This query command returns the selected Radio System with
strings.
BCCH Channel
TESTs:MANual:BCCH:CHANnel <int>
TESTs:MANual:BCCH:CHANnel?
This command sets the Broadcast Control Channel number
(BCCH) for each radio system set by the
command described above. The allowable range and preset
values are as follows:
Table 5-27 BCCH Channel Allowable Range and Preset Value
RFORmat
Allowable Range
GSM850
128 to 251
GSM900
955 to 1023, 0 to 124
DCS1800
512 to 885
PCS1900
512 to 810
Radio System
N9360A Multi UE Tester GSM Programming Manual
Preset Value
188
20
698
698