RUGGEDCOM ROX II
User Guide
Figure 257: IPv6 Kernel Active Routing Table
This table provides the following information:
Parameter
Subnet
Gateway Address
Interface Name
Route Type
Route Weight
Metric
If no IPv6 routes have been configured, add routes as needed. For more information, refer to
"Adding an IPv6 Static
Section 5.9
Viewing the Memory Statistics
To view statistics related to the Core, RIP, OSPF and BGP daemons, navigate to routing » status » memory.
The Core Daemon Memory Statistics, RIP Daemon Memory Statistics, OSPF Daemon Memory Statistics
and BGP Daemon Memory Statistics forms appear.
Viewing the Memory Statistics
Description
The network/prefix.
The gateway address.
The interface name.
The route type.
The route weight.
The metric value.
Route".
Chapter 5
Setup and Configuration
Section 5.22.3,
249