Deleting An Snmp Community - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Figure 269: Key Settings Form
1. Community Name Box
3. Configure the following parameter(s) as required:
Parameter
Community Name
4. Click Add to create the protocol. The SNMPv1/v2c Community Configuration screen appears.
Figure 270: SNMPv1/v2c Community Configuration Form
1. User Name List
5. Configure the following parameter(s) as required:
Parameter
User Name
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
6.
to proceed.
7. Click Exit Transaction or continue making changes.
Section 5.11.5.3

Deleting an SNMP Community

To delete an SNMP community, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
264
1
2. Add Button
Description
The SNMP community name.
1
Description
The SNMP community security name.
RUGGEDCOM ROX II
User Guide
2
Deleting an SNMP Community