Adding A Host Group; Configuring Host Group Options - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
If no host groups have been configured, add host groups as needed. For more information, refer to
Section 5.15.11.2, "Adding a Host
Section 5.15.11.2

Adding a Host Group

To add a host group to the DHCP server, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » dhcpserver » host-groups and click <Add host-groups>. The Key Settings form
appears.
Figure 369: Key Settings Form
1. Name Box 2. Add Button
3. Configure the following parameter(s) as required:
Parameter
name
4. Click Add to create the new host group.
5. Configure the options for the host group. For more information, refer to
Group Options"
6. Configure the client for the host group. For more information, refer to
Group Client".
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
7.
to proceed.
Click Exit Transaction or continue making changes.
8.
Section 5.15.11.3

Configuring Host Group Options

To configure options for a host group on the DHCP server, do the following:
Adding a Host Group
Group".
1
Description
The description of the host groups.
Setup and Configuration
2
Section 5.15.11.3, "Configuring Host
Section 5.15.11.4, "Configuring a Host
Chapter 5
343