Siemens RX1500 User Manual page 812

Chapter 5
Setup and Configuration
Configuring a Continue Mark
1. In the menu, click continue. The Mark Choice Continue form appears.
Figure 895: Mark Choice Continue Form
1. Continue Chain List
2. Configure the following parameter(s) as required:
Parameter
continue-chain
Configuring a DSCP Mark
In the menu, click dscpmarking. The Mark Choice DSCP Marking form appears.
1.
Figure 896: Mark Choice DSCP Marking Form
1. DSCP Mark List
2. Configure the following parameter(s) as required:
Parameter
dscp-mark
dscpchain
780
1
Description
Synopsis: forward, prerouting
Default: forward
A chain in which the operation will take place.
1
2
2. DSCP Chain List
Description
Synopsis: BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41,
AF42, AF43, CS1, CS2, CS3, CS4, CS5, CS6, CS7, EF
A DSCP class value chosen amongst the given list.
Synopsis: forward, postrouting, prerouting
Default: forward
A chain where the DSCP marking will take place.
RUGGEDCOM ROX II
User Guide
Configuring QoS Marking