Show Ip Dns Statistics; Commands In The Global Configuration Mode; Ip Route - Siemens SCALANCE XM-400 Configuration Manual

Result
The table with the information about the DNS servers is displayed.
7.1.1.10

show ip dns statistics

Description
This command shows DNS statistics. It provides information about the type and number of
queries to the DNS server.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show ip dns statistics
Result
Information about the communication with the DNS server is displayed.
7.1.2

Commands in the global configuration mode

This section describes commands that you can call up in the Global configuration mode.
In Privileged EXEC mode, enter the
Commands relating to other topics that can be called in the Global configuration mode can
be found in the relevant sections.
You exit the Global configuration mode with the
Privileged EXEC mode again.
7.1.2.1

ip route

Description
With this command, you configure a static entry in the IP routing table.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 11/2015, C79000-G8976-C252-10
or
cli#
command to change to this mode.
configure terminal
or
end exit
Network protocols
7.1 IPv4 protocol
command and are then in the
265