Deleting A Prefix List Distribution Path; Managing Key Chains And Keys - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
6. If necessary, configure an event tracker to track network commands. For more information, refer to
Section 5.20.4.2, "Tracking
7. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
8. Click Exit Transaction or continue making changes.
Section 5.20.8.3

Deleting a Prefix List Distribution Path

To delete a prefix list distribution path for dynamic RIP routes, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to routing » dynamic » rip » distribute-prefix-list. The Distribute Prefix List table appears.
1
Figure 565: Distribute Prefix List Table
1. Add Button
Click Delete next to the chosen path.
3.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.20.9

Managing Key Chains and Keys

Key chains are collections of keys (or shared secrets), which are used to authenticate communications over a
dynamic RIP network. Only routers with the same key are able to send and receive advertisements.
Multiple key chains can be configured for different groups of interfaces and the lifetime for each key within a chain
can be separately configured.
The following sections describe how to configure and manage key chains and keys:
• Section 5.20.9.1, "Viewing a List of Key Chains"
• Section 5.20.9.2, "Viewing a List of Keys"
• Section 5.20.9.3, "Adding a Key Chain"
• Section 5.20.9.4, "Adding a Key"
Deleting a Prefix List Distribution Path
Commands".
2. Edit Button 3. Delete Button
2 3
Chapter 5
Setup and Configuration
495