Viewing The Ipsec Tunnel Status - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
6. Navigate to tunnel » ipsec » connection » {connection} » {end}, where {connection} is the name of the
connection and {end} is the either the left (local router) or right (remote router) connection end. The System
Public Key and System Identifier forms appear.
Figure 718: System Public Key Form
1. Type List 2. Certificate List (Hidden)
Figure 719: System Identifier Form
1. Type List 2. Hostname or IP Address
On the System Public Key form, set Type to certificate. The Certificate parameter appears.
7.
8. Under the Certificate list, select the appropriate certificate.
9. On the System Identifier form, set Type to from-certificate.
10. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
11. Click Exit Transaction or continue making changes.
Section 5.28.4

Viewing the IPsec Tunnel Status

To view the status of the IPsec tunnel, navigate to tunnel » ipsec. The IPSec Status form appears.
Viewing the IPsec Tunnel Status
1
3. RSA Signature List (Hidden)
1
2
Chapter 5
Setup and Configuration
617