Configuring Match Rules - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
1
Figure 492: Route Map Entry Table
1. Add Button 2. Edit Button
3. Click Delete next to the chosen entry.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
4.
to proceed.
Click Exit Transaction or continue making changes.
5.
Section 5.19.3.7

Configuring Match Rules

To configure match rules for a route map filter entry, do the following:
Change the mode to Edit Private or Edit Exclusive.
1.
2. Navigate to routing » dynamic » bgp » filter » route-map » {tag} » entry » {number} » match, where
{tag} is the tag for the route map filter and {number} is the sequence number for the entry. The Match
Address of Route, Match Nexthop of Route, Match Advertising Source Address and Match forms
appear.
Figure 493: Match Address of Route Form
1. Prefix List List
444
2 3
3. Delete Button
1
RUGGEDCOM ROX II
User Guide
Configuring Match Rules