Deleting An Lsp Refresh Interval - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Figure 472: Key Settings Form
1. Routing Type List
3. Configure the following parameter(s) as required:
Parameter
Routing Type
4. Click Add to create the new interval. The LSP Refresh Interval Routing Type form appears.
Figure 473: LSP Refresh Interval Routing Type Form
1. Interval Box
5. Configure the following parameter(s) as required:
Parameter
Interval
6. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
7. Click Exit Transaction or continue making changes.
Section 5.18.9.3

Deleting an LSP Refresh Interval

To delete an LSP refresh interval for an IS-IS area, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
Deleting an LSP Refresh Interval
1
2. Add Button
Description
Synopsis: level-1-only, level-2-only, level-1-2
The IS type for this setting, specified as level-1-only, level-2-only or level-1-2.
1
Description
Minimum interval in seconds, ranging from LSP generating interval to Maximum LSP
lifetime less 300 seconds. Default is 900.
Chapter 5
Setup and Configuration
2
429