Enabling And Configuring Cli Sessions - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Section 5.3

Enabling and Configuring CLI Sessions

To enable and configure CLI sessions, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to admin. The CLI Sessions form appears.
Figure 252: CLI Sessions
1. Enabled Check Box
6. Idle Timeout Box
3. Configure the following parameter(s):
Enabling and Configuring CLI Sessions
1
2
3
4
5
6
7
2. Listen IP Box 3. Listen Port Box
7. Greeting Box
4. Extra IP Ports Box 5. Maximum Number of CLI Sessions Box
Chapter 5
Setup and Configuration
241