RUGGEDCOM ROX II
User Guide
Figure 125: Modbus TCP Configuration Form
1. Response Timer Box
Box
7. RTU-List Box
3.
In the menu, click the + symbol next to settcpmodbus to add the protocol.
4.
Configure the following parameter(s) as required:
Parameter
response-timer
pack-timer
turnaround
Configuring the Modbus TCP Protocol
1
2
3
4
5
6
7
2. Packet Timer Box
3. Turnaround Box
Description
Default: 100
The maximum time from the last transmitted character of the outgoing poll until the first
character of the response. If the RTU does not respond in this time, the poll will have
been considered failed.
Default: 1000
The maximum allowable time to wait for a response to a Modbus request to complete
once it has started.
Default: 0
4. Retransmit Box
5. Max Connection Box
Chapter 3
Device Management
6. Local Port
125