Chapter 5
Setup and Configuration
This table provides the following information:
Parameter
Name
tunnel-status
rx-packets
rx-errors
rx-drops
tx-packets
tx-errors
tx-drops
Section 5.30.2
Viewing a List of GRE Tunnels
To view a list of GRE tunnels, navigate to tunnel » gre. If tunnels have been configured, the Generic Routing
Encapsulation Interfaces table appears.
Figure 784: Generic Routing Encapsulation Interfaces Table
If no GRE tunnels have been configured, add tunnels as needed. For more information, refer to
"Adding a GRE
Tunnel".
Section 5.30.3
Adding a GRE Tunnel
To add a GRE tunnel, do the following:
1.
Change the mode to Edit Private or Edit Exclusive.
2.
Navigate to tunnel » gre and click <Add gre> in the menu. The Key Settings form appears.
664
Description
The GRE tunnel interface name.
The status of the tunnel.
The number of packets received through the tunnel.
The error packets received through the tunnel.
The number of packets dropped by the tunnel.
The number of packets transmitted through the tunnel.
The number of error packets transmitted through the tunnel.
The number of packets dropped by the tunnel.
RUGGEDCOM ROX II
User Guide
Section 5.30.3,
Viewing a List of GRE Tunnels