Siemens RX1500 User Manual page 266

Chapter 4
System Administration
Parameter
Hour
Day of Month
Month
Day of Week
Command
234
Description
• To specify a list of values, enter the values as a comma-separated list. For example,
to launch the job at 15, 30, and 45 minutes past the hour, enter 15,30,45.
• To specify a range of values, enter the range as comma-separated values. For
example, to launch the job every minute between 30 and 45 minutes past the hour,
enter 30-45.
This parameter is not required for configchange jobs.
For periodic jobs, sets the hour portion of the job launch time, in the 24-hour clock
format. Valid values are in the range of 0 to 23. If no value is set, the job launches every
hour at the time set in the Minute field.
• To specify a single value, enter the value in the field. For example, to launch the job at
5:00 pm, enter 17.
• To specify a list of values, enter the values as a comma-separated list. For example,
to launch the job at 9:00 am, 12:00 pm, and 5:00 pm, enter 9,12,17.
• To specify a range of values, enter the range as comma-separated values. For
example, to launch the job every hour between 9:00 am and 5:00 pm, enter 9-17.
This parameter is not required for configchange jobs.
For periodic jobs, sets the day of the month on which to run the scheduled job. Valid
values are in the range of 1 to 31. If no value is set, the job launches every day.
• To specify a single value, enter the value in the field. For example, to launch the job
on the tenth day of the month, enter 10.
• To specify a list of values, enter the values as a comma-separated list. For example,
to launch the job on the first, fifteenth, and thirtieth days of the month, enter 10,15,30.
• To specify a range of values, enter the range as comma-separated values. For
example, to launch the job on days one through fifteen, enter 1-15.
This parameter is not required for configchange jobs.
For periodic jobs, sets the month in which to run the scheduled job. Valid values are in
the rage of 1 to 12. If no value is set, the job launches every day.
• To specify a single value, enter the value in the field. For example, to set the month to
February, enter 2.
• To specify a list of values, enter the values as a comma-separated list. For example,
to set the months to January, June, and December, enter 1,6,12.
• To specify a range of values, enter the range as comma-separated values. For
example, to set the months to January through June, enter 1-6.
This parameter is not required for configchange jobs.
For periodic jobs, sets the day of the week on which to run the scheduled job. Valid
entries are in the range of 0 to 6, where 0 represents Sunday, 1 represents Monday, and
so on. If no value is set, the job launches every day.
• To specify a single value, enter the value in the field. For example, to set the day to
Monday, enter 1.
• To specify a list of values, enter the values as a comma-separated list. For example,
to set the days to Friday, Saturday, and Sunday, enter 5,6,0.
• To specify a range of values, enter the range as comma-separated values. For
example, to set the days to Monday through Friday, enter 1-5.
This parameter is not required for configchange jobs.
One or more commands to execute at the scheduled time. For example, this command
saves the running configuration to a file name 'myconfig': show running-config | save
myconfig.
Do not use interactive commands or commands that require a manual response or
confirmation.
When entered in the CLI, the command string must be enclosed in quotation marks.
When entered in the WebUI, the command string must not be enclosed in quotation
marks.
RUGGEDCOM ROX II
User Guide
Adding Scheduled Jobs