Deleting Rules - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Figure 442: Destination Zone Form
1. Pre-Defined Zone List
3. Configure the following parameter(s) as required:
Parameter
predefined-zone
other
all
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
Click Exit Transaction or continue making changes.
5.
Section 5.17.14.5

Deleting Rules

To delete a rule, do the following:
Change the mode to Edit Private or Edit Exclusive.
1.
2. Navigate to security » firewall » fwconfig » {firewall} » fwrule, where {firewall} is the name of the firewall.
The Main Rule Settings table appears.
404
2. Other Box 3. All Check Box
Description
A pre-defined zone
An undefined zone (string).
All zones
RUGGEDCOM ROX II
User Guide
Deleting Rules