Managing Traffic Control - Siemens RX1500 User Manual

Ruggedcom rox ii series
Hide thumbs Also See for RX1500:
Table of Contents

Advertisement

RUGGEDCOM ROX II
User Guide
Figure 869: LLDP Port Statistics Form
This table displays the following information:
Parameter
slot
Port
Frames Dropped
Error Frames
Frames In
Frames Out
Ageouts
TLVs Drops
TLVs Unknown
Section 5.37

Managing Traffic Control

Traffic control is a firewall subsystem that manages the amount of bandwidth for each network interface that
different types of traffic are permitted to use. For a traffic control configuration to work, a firewall must be
configured.
Managing Traffic Control
Description
Synopsis: pm1, pm2, main, sm, lm1, lm2, lm3, lm4, lm5, lm6, cm, em, trnk
The slot of the module that contains this port.
The port number as seen on the front plate silkscreen of the module.
A counter of all Link Layer Discovery Protocol (LLDP) frames discarded.
A counter of all Link Layer Discovery Protocol Units (LLDPUs) received with detectable
errors.
A counter of all Link Layer Discovery Protocol Units (LLDPUs) received.
A counter of all Link Layer Discovery Protocol Units (LLDPUs) transmitted.
A counter of the times that a neighbor's information has been deleted from the Link Layer
Discovery Protocol (LLDP) remote system MIB because the txinfoTTL timer has expired
A counter of all TLVs discarded
A counter of all TLVs received on the port that are not recognized by the Link Layer
Discovery Protocol (LLDP) local agent
Chapter 5
Setup and Configuration
755

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx1501Rx1510Rx1511Rx1512

Table of Contents