Memory Slot - Siemens RUGGEDCOM i803 Installation Manual

RUGGEDCOM i803
Installation Guide
MicroSD Port
RS232 Serial Console Port
Section 1.3

Memory Slot

The i803 features a removable microSD memory module to support the following features:
• Configuration update and backup
• Redundant firmware image
• Greatly expanded logging capability
• Fault-tolerant firmware update
CAUTION!
Configuration hazard – risk of data loss. The memory card must not be removed or replaced during
normal operation. Make sure power is not applied to the device when removing or inserting the
memory module.
In case of device failure, carefully remove the memory card, observing the following precautions:
• Power down the device, unplug any attached network, alarm and console cabling before removing the memory
card.
• Do not touch the memory card contacts.
• Do not expose the memory card to extremes of temperature or humidity.
• Do not expose the memory card to large magnetic or static electric fields.
• Do not bend or drop the card.
Before applying power to a replacement device, replace the memory card in the replacement device with the one
taken from the failed device. Reconnect all necessary cabling and apply power.
Memory Slot
This port houses the microSD card that may optionally contain the firmware and
configuration for the device. For more information, refer to
This port is for interfacing directly with the device and accessing initial management
functions.
Chapter 1
Introduction
Section 1.3, "Memory Slot".
3