Siemens RX1500 User Manual page 724

Chapter 5
Setup and Configuration
NOTE
Letters in MAC addresses must be lowercase.
Parameter
MAC Address
VLAN ID
4. Click Add to add the static MAC address. The Static MAC Address Parameters form appears.
Figure 814: Static MAC Address Parameters Form
1. Learned Check Box
5. Configure the following parameter(s) as required:
Parameter
learned
Slot
Port
CoS
6. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
7. Click Exit Transaction or continue making changes.
692
Description
A unicast MAC address that is to be statically configured. It can have up to 6 '*' wildcard
characters continuously applied from the right.
The VLAN identifier of the VLAN upon which the MAC address operates.
1
2
3
4
2. Slot List 3. Port List 4. CoS List
Description
If set, the system will auto-learn the port upon which the device with this address is
located.
Synopsis: sm, lm1, lm2, lm3, lm4, lm5, lm6
The name of the module location provided on the silkscreen across the top of the
device.
The selected ports on the module installed in the indicated slot.
Synopsis: N/A, normal, medium, high, crit
Default: normal
The priority of traffic for a specified address.
RUGGEDCOM ROX II
User Guide
Adding a Static MAC Address