Managing Network Entity Titles (Nets) - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Navigate to routing » dynamic » isis » area » {name} » lsp-refresh-interval, where {name} is the unique
2.
name for a routing process that belongs to a specific router. The LSP Refresh Interval Routing Type table
appears.
1
Figure 474: LSP Refresh Interval Routing Type
1. Add Button 2. Edit Button
Click Delete next to the chosen interval.
3.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.18.10

Managing Network Entity Titles (NETs)

Network Entity Titles (NETs) define the area address and system ID for the router. Traffic received from another
router that shares the same area address and system ID will be forwarded to this router.
ROX II supports IS-IS multi-homing, which allows for multiple NETs to be defined for a single router and
increases the list of possible traffic sources.
Each NET has a hexadecimal value, which can be between 8 and 20 octets long, although 10 octets is most
common. The value includes an Authority and Format Identifier (AFI), an area ID, a system identifier, and a
selector. The following is an example of an NET address:
0001.1921.6800.1001.00
• 49 is the AFI. Use 49 for private addressing.
• 0001 is the area ID. In this example, the area is 1.
• 1921.6800.1001 is the system identifier. Any number can be used, but typically the system identifier is a
modified form of the router's IP address. For example, the system identifier in this example translates to
192.168.1.1. To convert the address in the opposite direction, pad the IP address with zeros (0) and rearrange
the decimal points to form to make three two-byte numbers.
• 00 is the selector.
IMPORTANT!
The system identifier must be unique to the network.
The following sections describe how to configure and manage NETs for IS-IS areas:
430
2 3
3. Delete Button
RUGGEDCOM ROX II
Managing Network Entity Titles (NETs)
User Guide