Managing Static Cross-Connects; Viewing The Status Of Static Cross-Connects - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
1
Figure 933: Static MPLS Bindings for IPv4 Addresses Table (Example)
1. Add Button
3. Click Delete next to the chosen static label.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
4.
to proceed.
Click Exit Transaction or continue making changes.
5.
Section 5.39.6

Managing Static Cross-Connects

The following sections describe how to configure and manage static cross-connects for MPLS:
• Section 5.39.6.1, "Viewing the Status of Static Cross-Connects"
• Section 5.39.6.2, "Viewing a List of Static Cross-Connects"
• Section 5.39.6.3, "Adding a Static Cross-Connect"
• Section 5.39.6.4, "Deleting a Static Cross-Connect"
Section 5.39.6.1

Viewing the Status of Static Cross-Connects

To view the status of all configured static cross-connects, navigate to mpls » status » static-crossconnect. If
static cross-connects have been configured, the Static MPLS Cross-connects table appears.
Figure 934: Static MPLS Cross-connects Table
This table provides the following information:
Managing Static Cross-Connects
2. Edit Button 3. Delete Button
2 3
Chapter 5
Setup and Configuration
809