Siemens RX1500 User Manual page 384

Chapter 5
Setup and Configuration
Figure 381: Leased Configuration Form
1. Default Box 2. Maximum Box
Figure 382: IP Pool Configuration Form
1. Unknown Client Box
6. On the Leased Configuration form, configure the following parameter(s) as required:
Parameter
default
maximum
7. On the IP Pool Configuration form, configure the following parameter(s) as required:
Parameter
unknown-client
failover-peer
8. Add one or more IP ranges for the pool. For more information, refer to
Range to an IP
352
1
2
1
2
2. Failover Peer Box
Description
Default: 600
The minimum leased time in seconds that the server offers to the client.
Default: 7200
The maximum leased time in seconds that the server offers to the clients.
Description
Synopsis: allow, deny, ignore
The action to take for previously unregistered clients
The IP address of a DHCP peer server if a failover pool is created.
Pool".
Section 5.15.15.2, "Adding an IP
Adding an IP Pool
RUGGEDCOM ROX II
User Guide