Chapter 3
Device Management
Section 3.4
Shutting Down the Device
To shut down the device, do the following:
CAUTION!
Security hazard – risk of unauthorized access and/or exploitation. Always shutdown the device before
disconnecting power. Failure to shutdown the device first could result in data corruption.
NOTE
The device never enters a permanent shutdown state. When instructed to shutdown, the devices shuts
down and provides a time-out period during which power can be disconnected from the device. The
default time-out period is 300 seconds (five minutes). At the end of the time-out period, the device
reboots and restarts.
NOTE
If wiring hinders the process of disconnecting power from the device, the power module(s) can be
removed instead.
1.
Navigate to admin and click shutdown in the menu. The Trigger Action form appears.
Figure 27: Trigger Action Form
1. Perform Button
2.
Click Perform.
Section 3.5
Rebooting the Device
To reboot the device, do the following:
1.
Navigate to admin and click reboot in the menu. The Trigger Action form appears.
38
RUGGEDCOM ROX II
User Guide
1
Shutting Down the Device