Siemens RX1500 User Manual page 447

RUGGEDCOM ROX II
User Guide
Figure 455: Area Tag Form
1. IS Type List
Authorization List
5. Configure the following parameter(s) as required:
Parameter
Routing Type
Metric Style
Area Authorization
Adding an Area Tag
1
2
3
4
5
6
7
8
2. Metric Style List 3. Area Authorization List
7. Domain Password Box
Description
Synopsis: level-1-only, level-2-only, level-1-2
The IS type for this area: level-1-only, level-2-only or level-1-2. Level-1 routers have
neighbors only on the same area. Level-2-only (backbone) can have neighbors on
different areas. Level-1-2 can have neighbors on any areas. Default is level-1-2.
Synopsis: narrow, transition, wide
Default: wide
The metric style Type length Value (TLV) for this area: narrow, transition or wide. Default
is wide.
Synopsis: clear, md5
Default: clear
The authorization type for the area password. Default is clear.
4. Area Password Box
8. Domain Authentication List
Setup and Configuration
5. Area Authentication List 6. Domain
Chapter 5
415