RUGGEDCOM ROX II
User Guide
Section 5.26.2
Viewing the Status of VRRP
To view the status of VRRP, navigate to services » vrrp » status. The VRRP Status form appears.
Figure 676: VRRP Status Form
This table provides the following information:
Parameter
Instance Name
State
Priority
Time of Change to Current State
Interface State
Section 5.26.3
Enabling/Disabling VRRP
To enable or disable VRRP, do the following:
1.
Change the mode to Edit Private or Edit Exclusive.
2.
Navigate to services » vrrp. The Virtual Router Redundancy Protocol (VRRP) form appears.
Figure 677: Virtual Router Redundancy Protocol (VRRP) Form
1. Enable VRRP Service Check Box
3.
Configure the following parameter(s) as required:
Viewing the Status of VRRP
Description
The VRRP instance name.
The VRRP instance state.
The VRRP instance priority.
The time of change to the current state.
The VRRP interface state.
1
2
2. Router ID Box
Chapter 5
Setup and Configuration
583