Managing Forbidden Ports; Viewing A List Of Forbidden Ports - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Change the mode to Edit Private or Edit Exclusive.
1.
2. Navigate to switch » vlans » static-vlan. The Static VLANs table appears.
1
Figure 845: Static VLANs Table
1. Add Button 2. Edit Button
3. Click Delete next to the chosen static VLAN.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
4.
to proceed.
Click Exit Transaction or continue making changes.
5.
Section 5.35.5

Managing Forbidden Ports

Static VLANs can be configured to exclude ports from membership in the VLAN using the forbidden ports list.
The following sections describe how to configure and manage a list of forbidden ports:
• Section 5.35.5.1, "Viewing a List of Forbidden Ports"
• Section 5.35.5.2, "Adding a Forbidden Port"
• Section 5.35.5.3, "Deleting a Forbidden Port"
Section 5.35.5.1

Viewing a List of Forbidden Ports

To view a list of forbidden ports, navigate to switch » vlans » static-vlan » {name} » forbidden-ports, where
{name} is the name of the static VLAN. If ports have been forbidden, the Forbidden Ports table appears.
Figure 846: Forbidden Ports Table
736
2 3
3. Delete Button
RUGGEDCOM ROX II
User Guide
Managing Forbidden Ports