Siemens RX1500 User Manual page 284

Chapter 5
Setup and Configuration
Figure 262: NETCONF Sessions
1. Enabled Check Box
Box 6. Idle Timeout Box
CAUTION!
Security hazard – risk of unauthorized access/exploitation. Configure an idle timeout period for
NETCONF to prevent unauthorized access (e.g. a user leaves their station unprotected) or denial
of access (e.g. a guest user blocks an admin user by opening the maximum number of NETCONF
sessions).
IMPORTANT!
Before configuring an idle timeout on a device managed by RUGGEDCOM NMS, make sure NMS
is configured to support a timeout period for NETCONF sessions.
3. Configure the following parameter(s):
252
1
2
3
4
5
6
2. Listen IP Box 3. Listen Port Box 4. Extra IP Ports Box 5. Maximum Number of NETCONF Sessions
Enabling and Configuring NETCONF Sessions
RUGGEDCOM ROX II
User Guide