Siemens RX1500 User Manual page 542

Chapter 5
Setup and Configuration
Parameter
Inter Area Routes Distance
intra Area Routes Distance
4. In the OSPF Configuration form, configure the following parameters:
Parameter
Enable OSPF
ABR Type
Auto Cost Reference Bandwidth
Compatible with RFC1583
Default Information Originate
Default Metric
Distance
Enable Opaque-LSA capability
Passive Default
Refresh Timer
Router ID
5. If you checked the Default Information Originate Check Box in the OSPF Configuration form, the Default
Information Originate form appears.
510
Description
The administrative distance for inter-area routes.
The administrative distance for intra-area routes.
Description
Enables the OSPF dynamic routing protocol.
Synopsis: cisco, ibm, shortcut, standard
Default: cisco
The OSPF ABR type.
Default: 100
Calculates the OSPF interface cost according to bandwidth [1-4294967 Mbps]
Enables the compatibility with the obsolete RFC1583 OSPF (the current is RFC2178)
Advertises the default route.
The default metric of redistribute routes.
The administrative distance.
Enables the Opaque-LSA capability (rfc2370).
Default: true
Default passive value for new interface.
Default: 10
The refresh timer.
The Router ID for OSPF.
RUGGEDCOM ROX II
User Guide
Configuring OSPF