Viewing A List Of Subnets; Adding A Subnet - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Section 5.15.7.1

Viewing a List of Subnets

To view a list of subnets, navigate to services » dhcpserver » subnet. If subnets have been configured, the
Subnet Configuration table appears.
Figure 344: Subnet Configuration Table
If no subnets have been configured, add subnets as needed. For more information, refer to
"Adding a Subnet".
Section 5.15.7.2

Adding a Subnet

To add a subnet to the DHCP server, do the following:
NOTE
Make sure a shared network is configured before adding a new subnet. For information about
configuring a shared network, refer to
Change the mode to Edit Private or Edit Exclusive.
1.
2. Navigate to services » dhcpserver » subnet and click <Add subnet> in the menu. The Key Settings form
appears.
Figure 345: Key Settings Form
1. Name Box 2. Add Button
3. Configure the following parameter(s) as required:
Parameter
name
324
1
Description
The unique name to refer to the host within a DHCP configuration.
Section 5.15.6.2, "Adding a Shared
RUGGEDCOM ROX II
User Guide
Section 5.15.7.2,
Network".
2
Viewing a List of Subnets