Adding A Traffic Control Priority - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
If no priorities have been configured, add priorities as needed. For more information, refer to
"Adding a Traffic Control
Section 5.37.3.2

Adding a Traffic Control Priority

To add a new traffic control priority, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to qos » traffic-control » basic-configuration » tcpriorities, and click <Add tcpriorities>. The
Key Settings form appears.
Figure 876: Key Settings Form
1. Name Box 2. Add Button
3. Configure the following parameter(s) as required:
Parameter
name
4. Click Add to create the new traffic control priority. The Basic Traffic Control Priorities form appears.
762
Priority".
1
Description
A distinct name for this configuration entry.
RUGGEDCOM ROX II
User Guide
Section 5.37.3.2,
2
Adding a Traffic Control Priority