Deleting An Ip Range From A Subnet - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Figure 386: IP Range Configuration Form
1. End Box
6. Configure the following parameter(s) as required:
Parameter
end
7. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
8. Click Exit Transaction or continue making changes.
Section 5.15.14.3

Deleting an IP Range From a Subnet

To delete an IP range from a DHCP subnet, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » dhcpserver » subnet » {name} » options » iprange, where {name} is the name of
the subnet. The IP Range Configuration table appears.
1
Figure 387: IP Range Configuration Table
1. Add Button
3. Click Delete next to the chosen IP range.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Deleting an IP Range From a Subnet
1
Description
The ending IP address pool that the server uses to offer to the client.
2
2. Edit Button 3. Delete Button
3
Chapter 5
Setup and Configuration
355