Managing Gsm Profiles; Viewing A List Of Gsm Profiles - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
1
Figure 318: Cellular Network Configuration Table
1. Add Button
3. Click Delete next to the chosen profile.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.13.2

Managing GSM Profiles

GSM (Global System for Mobile Communications) profiles must be configured before HSPA data is available.
For more information about viewing the status of the HSPA networks, refer to
Network Status for Cellular
The following sections describe how to configure and manage GSM profiles:
• Section 5.13.2.1, "Viewing a List of GSM Profiles"
• Section 5.13.2.2, "Adding a GSM Profile"
• Section 5.13.2.3, "Deleting a GSM Profile"
Section 5.13.2.1

Viewing a List of GSM Profiles

To view a list of GSM profiles, navigate to global » cellular » profiles » gsm. If profiles have been configured,
the Cellular Network Configuration table appears.
Figure 319: Cellular Network Configuration Table
Managing GSM Profiles
2 3
2. Edit Button 3. Delete Button
Modems".
Setup and Configuration
Section 3.23.4, "Viewing the HSPA
Chapter 5
303