Chapter 5
Setup and Configuration
Section 5.21.8.2
Adding a Redistribution Metric
To add a redistribution metric for dynamic OSPF routes, do the following:
Change the mode to Edit Private or Edit Exclusive.
1.
2.
Navigate to routing » dynamic » ospf » redistribute and click <Add redistribute>. The Key Settings form
appears.
Figure 613: Key Settings Form
1. Redistribute Route From List
3.
Configure the following parameter(s) as required:
Parameter
Redistribute Route From
4.
Click Add to add the metric. The Redistribute From Other Routing Protocols form appears.
Figure 614: Redistribute From Other Routing Protocols Form
1. Metric Type Box
5.
Configure the following parameter(s) as required:
530
1
2. Add Button
Description
Synopsis: kernel, static, connected, rip, bgp
Redistributes the route type.
1
2
3
2. Metric Box
3. Route Map List
RUGGEDCOM ROX II
User Guide
2
Adding a Redistribution Metric