Managing Redistribution Metrics; Viewing A List Of Redistribution Metrics; Adding A Redistribution Metric - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Click Delete next to the chosen key.
3.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.20.10

Managing Redistribution Metrics

Redistribution metrics redistribute routing information from other routing protocols, static routes or routes handled
by the kernel. Routes for subnets that are directly connected to the router, but not part of the RIP networks, can
also be advertised.
The following sections describe how to configure and manage redistribution metrics:
• Section 5.20.10.1, "Viewing a List of Redistribution Metrics"
• Section 5.20.10.2, "Adding a Redistribution Metric"
• Section 5.20.10.3, "Deleting a Redistribution Metric"
Section 5.20.10.1

Viewing a List of Redistribution Metrics

To view a list of redistribution metrics for dynamic RIP routes, navigate to routing » dynamic » rip »
redistribute. If metrics have been configured, the Redistribute Route from Other Protocols table appears.
Figure 575: Redistribute Route from Other Protocols Table
If no redistribution metrics have been configured, add metrics as needed. For more information, refer to
Section 5.20.10.2, "Adding a Redistribution
Section 5.20.10.2

Adding a Redistribution Metric

To add a redistribution metric for dynamic RIP routes, do the following:
Change the mode to Edit Private or Edit Exclusive.
1.
2. Navigate to routing » dynamic » rip » redistribute and click <Add redistribute>. The Key Settings form
appears.
502
Metric".
RUGGEDCOM ROX II
User Guide
Managing Redistribution Metrics