Siemens RX1500 User Manual page 807

RUGGEDCOM ROX II
User Guide
Figure 890: Advanced Traffic Control Rules Form
1. Source Box
Box 8. TOS Box
5. Configure the following parameter(s) as required:
Parameter
source
destination
protocol
Destination Ports
Adding a Traffic Control Rule
1
2
3
4
5
6
7
8
9
2. Destination Box 3. Protocol Box
9. Description Box
Description
IF name, comma-separated list of hosts or IPs, MAC addresses, or 'all'.
When using MAC addresses, use '~' as prefix and '-' as separator. Ex.:
~00-1a-6b-4a-72-34,~00-1a-6b-4a-71-42
IF name, comma-separated list of hosts or IPs, or 'all'.
Synopsis: tcp, udp, icmp, all
Default: all
The protocol to match.
(Optional) A comma-separated list of port names, port numbers or port ranges.
4. Destination Ports Box 5. Source Ports Box
Chapter 5
Setup and Configuration
6. Test Box 7. Length
775