Siemens RX1500 User Manual page 111

RUGGEDCOM ROX II
User Guide
Figure 79: Key Settings Form
1. Slot Box 2. Add Button
3. Configure the following parameter(s) as required:
Parameter
slot
4. Click Add. The Fixed Modules form appears.
Figure 80: Fixed Modules Form
1. Installed Module Box
5. Configure the following parameter(s) as required:
Parameter
Installed Module
partnumber
6. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
7. Click Exit Transaction or continue making changes.
Adding a Fixed Module Configuration
Description
Synopsis: pm1, pm2, main, sm, lm1, lm2, lm3, lm4, lm5, lm6, cm, em, trnk
The slot name, as marked on the silkscreen across the top of the chassis.
2. Part Number Box
Description
The module type to be used in this slot.
The part number of the module type in this slot.
Chapter 3
Device Management
79